Quick View{"body_html":" Description Keeping your phone handy when you're on the road is as simple as a single click. With our magnetic phone vent mount, your phone will stay securely connected to your vents even as you handle the massive potholes left behind by our crumbling state infrastructure. Or snowplows. You pick. One things for sure, this magnetic vent dash mount is so easy to use, it's a must have for your car, your phone, and you. Features FEATURES Fits phones up to 4 inches wide (with case) Extendable foot with openings for ports and headphone jacks for most phones so they can charge while mounted Metal plate with 3M binding agent Magnetic mount with soft touch surface Secures phone against jolts, bumps, and shaking Please close vent before securing phone to vent to prevent direct air from overheating/overcooling Adjustable 130 degrees horizontally and 360 degrees vertically Tighten ball-joint collar for perfect positioning Tighten wingnut clamp to secure on vent CAUTION: Do not use metal plates or covers with any wireless chargers. Remove metal backing, phone rings, or metal covers before charging wirelessly. FEATURES & BENEFITS • Magnetic Vent Mount A two-part mounting system, the metal plate is secured to the phone, and automatically snaps onto the magnetic mounting pad on the vent clamp. • Foot Cradle-Lock Extendable foot with unlock button tilted to support the bottom of the phone, with gaps for ports and 3.5mm jacks sized for most devices. • Ball Joint Twist Lock Adjust your phone 360 degrees vertically or 130 degrees horizontally with the ball joint, then lock into your favored position with a twist of the ball joint collar. • Air Vent Twist Lock The clamping feature uses small rubber grip teeth and a wing-nut closure to create a secure grip on the car vent for your phone. • Soft PVC Backpad Uses expanded surface friction to help secure the phone against slippage. • Instructions Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on kickstand to adjust the bracing mechanism against the dashboard below the vent. Flip open foot cradle. Ensure ports are clear for charging or audio. Clean the back of your phone cover, then peel the paper off of the 3M binding agent and secure the metal plate close to the bottom of your phone. Press and hold for 10 seconds for a stronger bond. Place phone in the cradle and it will snap into place. Your phone is now magnetically secure! STORYTIME When we were selecting the perfect vent mount, we did a whole battery of testing, putting our own phones on the line. This one won, hands down. And hands up. And hands sideways. Our product developers had a phone measuring contest, and the manager's won as the largest, heaviest phone. She placed the magnetic backing on her phone, placed it on the mount, then violently shook it every which way - endangering all of her contacts, her pictures of internet cats, her iExpensive screen, you name it. We doubt her phone insurance covered this test. While we don't recommend you try the same, you should know the lengths we continue to go to in order to make sure this magnetic dashboard vent mount would keep your phone in place. So yes, this vent mount will keep your heavy phone secure on your vent - though if you have weak vents, you may have to reconsider. Specs WEIGHT 2.6 oz DIMENSIONS 3 x 1.95 x 3.25 in COLOR Astro Black COUNTRY OF ORIGIN China COMPATIBLE DEVICES All devices with a width of less than 4 inches with case CONSTRUCTION Durable PVC construction with 1 button for extendable features with 360 degree rotating adjustment and magnetic metal mount plate, metal plate with 3M binding agent and two locking mechanisms for rotation and vent mount MATERIAL BENEFITS Rigid PVC has a maximum continual use temperature of 140 degrees Fahrenheit. It has good flame, acid, alkaline, and oil resistance. Non corrosive and durable. Warranties & Manuals Warranties & Manuals Disclaimer: Use at your own risk. Hottips! is not liable for any damage to devices due to collisions or improper use of product. Product Manual Instructions: Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on the kickstand and adjust it to brace the mount against the dashboard below the vent. Flip out the extender foot. Clean the back of your phone cover. When it is dry and clean, take the metal plate, peel off the 3M tape, and stick the metal plate to the bottom of the back of your phone or phone cover. Hold for 10 seconds for a stronger bond Place phone against the magnetic pad and it will click into place! No Questions Guarantee If you are unsatisfied with our Hottips! ® product, please send the product with an explanation to the below address with $6 for a replacement. If you need assistance, please call our toll-free support at 1-800-525-5097 or mail to Navajo Incorporated, 5330 Fox Street, Denver, CO 80216. Or email us at help@hottipsusa.com Save The Planet! Please recycle this product at any local retailers that accept electronics recycling or your local electronics and plastic waste recycling company. Made of rigid PVC, rubber, and steel components. ALL PAPER PACKAGING - 100% recyclable and biodegradable! ","skus":["22447"],"available":true,"created_at":"2020-10-07T21:41:03Z","review_count":0,"variants":[{"merged_options":["title:Default Title"],"inventory_quantity":4,"image":null,"original_merged_options":["title:Default Title"],"compare_at_price":null,"inventory_management":"shopify","available":true,"weight":3.3,"title":"Default Title","inventory_policy":"deny","weight_unit":"oz","price":1299,"id":36525612761251,"sku":"22447","barcode":"024291224471","option1":"Default Title","option_title":"Default Title","options":["Default Title"]}],"media":[],"title":"Magnetic Traction Car Vent Mount Smartphone Holder","price_min":1299,"images_info":[{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_1copy.jpg?v=1602261996","width":1024,"alt":null,"id":11569938202787,"position":1,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Anglecopy.png?v=1602262045","width":1024,"alt":null,"id":11569946067107,"position":2,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Back.png?v=1602262049","width":1024,"alt":null,"id":11569947476131,"position":3,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/2019DualCarChargers.Black.jpg?v=1602262050","width":1024,"alt":null,"id":11569947607203,"position":4,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Front_Opencopy.png?v=1602262060","width":1024,"alt":null,"id":11569949540515,"position":5,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_2.png?v=1602262096","width":1024,"alt":null,"id":11569954357411,"position":6,"height":1024}],"review_ratings":0,"template_suffix":"","updated_at":"2025-05-15T02:10:03Z","collections":[{"template_suffix":"","handle":"fathers-day","id":201006579875,"sort_value":"5g","title":"Father's Day"},{"template_suffix":null,"handle":"frontpage","id":59529822277,"sort_value":"1m","title":"Home page"},{"template_suffix":"","handle":"all-products","id":291436560547,"sort_value":"37c54","title":"All Products"},{"template_suffix":null,"handle":"protection","id":60807708741,"sort_value":"1p","title":"Protection"},{"template_suffix":"","handle":"best-selling-products","id":61966712901,"sort_value":"3","title":"Best Selling"}],"vendor":"Hottips!","percent_sale_min":0,"best_selling_rank":14,"html":{"theme_id":0,"value":""},"id":5746132877475,"published_at":"2020-10-09T16:48:50Z","images":["https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_1copy.jpg?v=1602261996"],"options_with_values":[{"original_name":"title","values":[{"image":null,"title":"Default Title"}],"name":"title","label":"Title","position":1}],"weight_min":3300,"handle":"magnetic-traction-car-vent-mount-smartphone-holder","compare_at_price_min":0,"barcodes":["024291224471"],"tags":["Car Mount","Protection","Smartphone accessory","Smartphone mount","Vent Mount"],"published_scope":"web","metafields":[],"product_type":"Protection","weight_max":3300,"locations":[],"position":null,"compare_at_price_max":0,"product_category":null,"price_max":1299,"featured_image":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_1copy_large.jpg?v=1602261996","url":"/products/magnetic-traction-car-vent-mount-smartphone-holder","options":["title"],"price":1299,"compare_at_price":0,"price_varies":false,"selected_or_first_available_variant":{"merged_options":["title:Default Title"],"inventory_quantity":4,"image":null,"original_merged_options":["title:Default Title"],"compare_at_price":null,"inventory_management":"shopify","available":true,"weight":3.3,"title":"Default Title","inventory_policy":"deny","weight_unit":"oz","price":1299,"id":36525612761251,"sku":"22447","barcode":"024291224471","option1":"Default Title","option_title":"Default Title","options":["Default Title"]},"content":" Description Keeping your phone handy when you're on the road is as simple as a single click. With our magnetic phone vent mount, your phone will stay securely connected to your vents even as you handle the massive potholes left behind by our crumbling state infrastructure. Or snowplows. You pick. One things for sure, this magnetic vent dash mount is so easy to use, it's a must have for your car, your phone, and you. Features FEATURES Fits phones up to 4 inches wide (with case) Extendable foot with openings for ports and headphone jacks for most phones so they can charge while mounted Metal plate with 3M binding agent Magnetic mount with soft touch surface Secures phone against jolts, bumps, and shaking Please close vent before securing phone to vent to prevent direct air from overheating/overcooling Adjustable 130 degrees horizontally and 360 degrees vertically Tighten ball-joint collar for perfect positioning Tighten wingnut clamp to secure on vent CAUTION: Do not use metal plates or covers with any wireless chargers. Remove metal backing, phone rings, or metal covers before charging wirelessly. FEATURES & BENEFITS • Magnetic Vent Mount A two-part mounting system, the metal plate is secured to the phone, and automatically snaps onto the magnetic mounting pad on the vent clamp. • Foot Cradle-Lock Extendable foot with unlock button tilted to support the bottom of the phone, with gaps for ports and 3.5mm jacks sized for most devices. • Ball Joint Twist Lock Adjust your phone 360 degrees vertically or 130 degrees horizontally with the ball joint, then lock into your favored position with a twist of the ball joint collar. • Air Vent Twist Lock The clamping feature uses small rubber grip teeth and a wing-nut closure to create a secure grip on the car vent for your phone. • Soft PVC Backpad Uses expanded surface friction to help secure the phone against slippage. • Instructions Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on kickstand to adjust the bracing mechanism against the dashboard below the vent. Flip open foot cradle. Ensure ports are clear for charging or audio. Clean the back of your phone cover, then peel the paper off of the 3M binding agent and secure the metal plate close to the bottom of your phone. Press and hold for 10 seconds for a stronger bond. Place phone in the cradle and it will snap into place. Your phone is now magnetically secure! STORYTIME When we were selecting the perfect vent mount, we did a whole battery of testing, putting our own phones on the line. This one won, hands down. And hands up. And hands sideways. Our product developers had a phone measuring contest, and the manager's won as the largest, heaviest phone. She placed the magnetic backing on her phone, placed it on the mount, then violently shook it every which way - endangering all of her contacts, her pictures of internet cats, her iExpensive screen, you name it. We doubt her phone insurance covered this test. While we don't recommend you try the same, you should know the lengths we continue to go to in order to make sure this magnetic dashboard vent mount would keep your phone in place. So yes, this vent mount will keep your heavy phone secure on your vent - though if you have weak vents, you may have to reconsider. Specs WEIGHT 2.6 oz DIMENSIONS 3 x 1.95 x 3.25 in COLOR Astro Black COUNTRY OF ORIGIN China COMPATIBLE DEVICES All devices with a width of less than 4 inches with case CONSTRUCTION Durable PVC construction with 1 button for extendable features with 360 degree rotating adjustment and magnetic metal mount plate, metal plate with 3M binding agent and two locking mechanisms for rotation and vent mount MATERIAL BENEFITS Rigid PVC has a maximum continual use temperature of 140 degrees Fahrenheit. It has good flame, acid, alkaline, and oil resistance. Non corrosive and durable. Warranties & Manuals Warranties & Manuals Disclaimer: Use at your own risk. Hottips! is not liable for any damage to devices due to collisions or improper use of product. Product Manual Instructions: Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on the kickstand and adjust it to brace the mount against the dashboard below the vent. Flip out the extender foot. Clean the back of your phone cover. When it is dry and clean, take the metal plate, peel off the 3M tape, and stick the metal plate to the bottom of the back of your phone or phone cover. Hold for 10 seconds for a stronger bond Place phone against the magnetic pad and it will click into place! No Questions Guarantee If you are unsatisfied with our Hottips! ® product, please send the product with an explanation to the below address with $6 for a replacement. If you need assistance, please call our toll-free support at 1-800-525-5097 or mail to Navajo Incorporated, 5330 Fox Street, Denver, CO 80216. Or email us at help@hottipsusa.com Save The Planet! Please recycle this product at any local retailers that accept electronics recycling or your local electronics and plastic waste recycling company. Made of rigid PVC, rubber, and steel components. ALL PAPER PACKAGING - 100% recyclable and biodegradable! ","description":" Description Keeping your phone handy when you're on the road is as simple as a single click. With our magnetic phone vent mount, your phone will stay securely connected to your vents even as you handle the massive potholes left behind by our crumbling state infrastructure. Or snowplows. You pick. One things for sure, this magnetic vent dash mount is so easy to use, it's a must have for your car, your phone, and you. Features FEATURES Fits phones up to 4 inches wide (with case) Extendable foot with openings for ports and headphone jacks for most phones so they can charge while mounted Metal plate with 3M binding agent Magnetic mount with soft touch surface Secures phone against jolts, bumps, and shaking Please close vent before securing phone to vent to prevent direct air from overheating/overcooling Adjustable 130 degrees horizontally and 360 degrees vertically Tighten ball-joint collar for perfect positioning Tighten wingnut clamp to secure on vent CAUTION: Do not use metal plates or covers with any wireless chargers. Remove metal backing, phone rings, or metal covers before charging wirelessly. FEATURES & BENEFITS • Magnetic Vent Mount A two-part mounting system, the metal plate is secured to the phone, and automatically snaps onto the magnetic mounting pad on the vent clamp. • Foot Cradle-Lock Extendable foot with unlock button tilted to support the bottom of the phone, with gaps for ports and 3.5mm jacks sized for most devices. • Ball Joint Twist Lock Adjust your phone 360 degrees vertically or 130 degrees horizontally with the ball joint, then lock into your favored position with a twist of the ball joint collar. • Air Vent Twist Lock The clamping feature uses small rubber grip teeth and a wing-nut closure to create a secure grip on the car vent for your phone. • Soft PVC Backpad Uses expanded surface friction to help secure the phone against slippage. • Instructions Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on kickstand to adjust the bracing mechanism against the dashboard below the vent. Flip open foot cradle. Ensure ports are clear for charging or audio. Clean the back of your phone cover, then peel the paper off of the 3M binding agent and secure the metal plate close to the bottom of your phone. Press and hold for 10 seconds for a stronger bond. Place phone in the cradle and it will snap into place. Your phone is now magnetically secure! STORYTIME When we were selecting the perfect vent mount, we did a whole battery of testing, putting our own phones on the line. This one won, hands down. And hands up. And hands sideways. Our product developers had a phone measuring contest, and the manager's won as the largest, heaviest phone. She placed the magnetic backing on her phone, placed it on the mount, then violently shook it every which way - endangering all of her contacts, her pictures of internet cats, her iExpensive screen, you name it. We doubt her phone insurance covered this test. While we don't recommend you try the same, you should know the lengths we continue to go to in order to make sure this magnetic dashboard vent mount would keep your phone in place. So yes, this vent mount will keep your heavy phone secure on your vent - though if you have weak vents, you may have to reconsider. Specs WEIGHT 2.6 oz DIMENSIONS 3 x 1.95 x 3.25 in COLOR Astro Black COUNTRY OF ORIGIN China COMPATIBLE DEVICES All devices with a width of less than 4 inches with case CONSTRUCTION Durable PVC construction with 1 button for extendable features with 360 degree rotating adjustment and magnetic metal mount plate, metal plate with 3M binding agent and two locking mechanisms for rotation and vent mount MATERIAL BENEFITS Rigid PVC has a maximum continual use temperature of 140 degrees Fahrenheit. It has good flame, acid, alkaline, and oil resistance. Non corrosive and durable. Warranties & Manuals Warranties & Manuals Disclaimer: Use at your own risk. Hottips! is not liable for any damage to devices due to collisions or improper use of product. Product Manual Instructions: Loosen ball joint collar - place ball joint into socket until it pops. Close selected dashboard vent. Secure alligator clamp to external flange of the vent. Holding the mount in place, twist wingnut to the right until the alligator clamp is tight. Adjust vent mount to the angle you'd prefer, then tighten collar on ball joint to secure in place. Press button on the kickstand and adjust it to brace the mount against the dashboard below the vent. Flip out the extender foot. Clean the back of your phone cover. When it is dry and clean, take the metal plate, peel off the 3M tape, and stick the metal plate to the bottom of the back of your phone or phone cover. Hold for 10 seconds for a stronger bond Place phone against the magnetic pad and it will click into place! No Questions Guarantee If you are unsatisfied with our Hottips! ® product, please send the product with an explanation to the below address with $6 for a replacement. If you need assistance, please call our toll-free support at 1-800-525-5097 or mail to Navajo Incorporated, 5330 Fox Street, Denver, CO 80216. Or email us at help@hottipsusa.com Save The Planet! Please recycle this product at any local retailers that accept electronics recycling or your local electronics and plastic waste recycling company. Made of rigid PVC, rubber, and steel components. ALL PAPER PACKAGING - 100% recyclable and biodegradable! ","images_dup":[{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_1copy.jpg?v=1602261996","width":1024,"alt":null,"id":11569938202787,"position":1,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Anglecopy.png?v=1602262045","width":1024,"alt":null,"id":11569946067107,"position":2,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Back.png?v=1602262049","width":1024,"alt":null,"id":11569947476131,"position":3,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/2019DualCarChargers.Black.jpg?v=1602262050","width":1024,"alt":null,"id":11569947607203,"position":4,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Front_Opencopy.png?v=1602262060","width":1024,"alt":null,"id":11569949540515,"position":5,"height":1024},{"src":"https://cdn.shopify.com/s/files/1/0022/3903/7509/products/22447_Magnetic_CarVentMount_Beauty_2.png?v=1602262096","width":1024,"alt":null,"id":11569954357411,"position":6,"height":1024}],"type":"Protection"}